Login

Home Material Handling :: JET®- 3 Ton 3 Phases DUEL SPEED HEAVY DUTY ELECTRIC CHAIN HOIST (303---)

Product Details


J E T®

Free shipping available to Continental United States only.

DS SERIES
DUEL SPEED HEAVY DUTY ELECTRIC CHAIN HOIST

3 Ton 3 Phases

Designed for commercial and industrial applications the JET Dual Speed Electric Hoists are easy to install, inspect, and maintain. Each comes equipped with a heavy duty ventilated motor available in a range of HP from 1-1/5 to 2-1/7. Gear trains feature lifetime lubrication eliminating the need for oil changes. All models come standard with slip clutch overload protection, chain containers, and drop forged, heat treated hooks that swivel 360 degrees for easy rigging. Quick connect wiring for power and push button controls allow for quick set-up while the DC electromagnetic brake secures loads even if power is interrupted.

For added convenience and versatility equip the DS Series Electric Hoists with a JET ET series Electric Trolley. Available in a variety of capacities the ET Electric Trolley features the same quick-connect cords as the DS Electric Hoists allowing for fast set-up and installation.

DETAILS
Designed for commercial and industrial applications 1/2-ton to 5-ton capacities, single or three phase models Slip clutch design overload protection Easy to install, inspect and maintain Totally enclosed steel plate construction with a durable powder coat finish Gear train features lifetime lubrication, no oil changes required Heavy-duty ventilated motor Reverse phase protection and thermal overload protection Can be operated on 50Hz power with 20% reduction in lifting speed Comes standard with chain container Drop forged, heat treated hooks swivel 360° for easy rigging Reliable DC electro-magnetic brake holds the load even if power is interrupted Quick-connect wiring for power and push button controls Upper and lower limit switches prevent over-travel Durable low voltage 24V push button control station with cable strain relief Proof tested with test certificate Compliance: OSHA, ANSI / ASME B30.16 and HST-1 standards.

SPECIFICATIONS
	3 Tons- 10' 3- Phases	3 Tons- 20' 3- Phases
Model #	3DS-3C-10	3DS-3C-20
Standard Lift (ft)	10'	20'
Capacity (tons)	3	3
Load Chain (dia./mm)	8	8
Hoisting Speed (FPM)	8.3, 2.8	8.3, 2.8
Headroom (in)	31-1/2	31-1/2
Motor	2-1/7HP, 3Ph 230V/460V	2-1/7HP, 3Ph 230V/460V
Number of Falls	3	3
Part #	303100	303200
Gross Weight (lbs)	216	245

CAUTION
Be sure that the supporting structures and load attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting, or transporting people or lifting or supporting loads over people.